Heavy Duty 10HP 4 Stroke Diesel Engine Single Cylinder 1 Shaft Air-Cooled 418CC

  
Specification Model: 186FA Color: Black Material: Iron, Die-casting Aluminum, Aluminum Process: Spray Molding Machine Type: Single-cylinder, Vertical, 4-stroke, Forced Air-cooled Shaft Type: Recoil Manual Start Crankshaft: Horizontal Fuel Type: Diesel Bolt Pattern: 4 Bolt Combustion System: Direct Injection Lubrication Mode: Pressure and Splash Compound Method Power: 6.3kw, 10hp Rotation Speed: 3600rpm Displacement: 418cc Fuel Tank Capacity: 5.5L/1.45Gal Lubricating Oil Volume: 1.65L/0.44Gal Fuel Consumption Rate:? H Compression Ratio: 19:1 Bore Stroke: 86x72mm/3.392.83inch Shaft Diameter: 25mm/0.98inch Shaft Length: 72.2mm/2.84inch Shaft I. Thread Size: 7/16-20UFN-2B, 20mm Depth Gross Weight: 49.85kg/109.9lbs Net Weight: 41.85kg/92.26lbs.

10HP 406cc 4-stroke Tiller Diesel Engine Single Cylinder Motor Air Cooling 186F. 418CC 10HP Engine 4 Strok. 186F Diesel Engine 10HP 4 Stroke 406cc Air-Cooled Single Cylinder Machinery. Engine adopts a four-stroke engine.

High power and high speed can provide you with strong working power. The direct injection fuel system is more effective in burning fuel, improving fuel economy and engine efficiency.

Excellent performance and fine craftsmanship make it have a longer service life. Please don't hesitate, it will be a good helper for your efficient work. This product is widely used in farmland operation, garden irrigation, drainage and emergency repair, and small engineering machinery. It can also be used in the field of small agricultural machinery such as micro-tillers, pasture management machines, drainage and irrigation machines, generator sets, small transport vehicles, small walk-behind tractors, and so on. It is made of high-quality iron, aluminum, and die-casting aluminum, with a sturdy structure and good heat dissipation.

The surface is treated with. Spray molding technology, which can improve the corrosion. Of the engine and extend its service life. With a power of up to 6.3kw and a speed of up to 3,600rpm, this four-stroke engine can provide you with strong power to increase your productivity and save you time and energy.

It adopts a manual recoil start method, which is more convenient for your operation and allows you to use it more quickly for work. Moreover, the ergonomic design knob can position at any speed. It is also equipped with a throttle cable mounting bracket, which can be installed as needed. The forced air-cooling system and the dense cooling holes in the casing dissipate heat quickly and promptly, which not only prolongs the engine's service life but also ensures that the engine will not stall even after a long period of operation. The fuel tank of this engine holds 1.45 gal of fuel. The large capacity allows you to use it continuously with fewer interruptions without the need for frequent refueling. A quality air filter can prevent airborne impurities and dust from entering the engine interior, improving engine performance and extending service life. Moreover, it adopts a single-valve direct fuel injection system, which can improve fuel utilization efficiency and reduce engine wear. Multiple wrapping of wooden crates, foam and cartons can effectively protect our product in transit.

We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible.

It can help machine effectively reduce noise and provide you with a comfortable working environment. It can help control the air pressure inside the engine cylinder, prevent the engine from producing excessive air pressure during operation, and thus protect the engine and cylinder from damage. It helps you to check the level and amount of oil at any time and fill the oil in time to keep the engine running normally. It can discharge the oil-water mixture of the engine in time, which is beneficial to the maintenance and repair of the engine. Material: Iron, Die-casting Aluminum, Aluminum. Machine Type: Single-cylinder, Vertical, 4-stroke, Forced Air-cooled. Shaft Type: Recoil Manual Start. Lubrication Mode: Pressure and Splash Compound Method.

Fuel Tank Capacity: 5.5L/1.45Gal. Lubricating Oil Volume: 1.65L/0.44Gal. Bore Stroke: 86x72mm/3.392.83inch.

Shaft Length: 72.2mm/2.84inch. Thread Size: 7/16-20UFN-2B, 20mm Depth.

Gross Weight: 49.85kg/109.9lbs. Net Weight: 41.85kg/92.26lbs. Package Size: 534857.5cm/20.8718.922.64inch. Product Size: 434149cm/ 16.9316.1419.29inch. Please read the operating manual completely before use.

And pay particular attention to the safety instructions included. Se the specified diesel and guarantee the diesel is clean. Please use different lubricating oils for different seasons and keep the oil quantity within the specified range. Please don't run the engine when it exhausts black smoke. When using the air filter, remove the air filter element every 50 hours (if there is much dust, remove it every 10 hours, clean it with clean detergent, blow it dry, and then put it into use).

Please allow the slight color difference caused by the shooting chandelier and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us.

It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business.

A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.

If it's non-workdays, please kindly be patient and wait till Monday.