Stroke Single Cylinder

Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection

Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection
Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection
Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection
Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection
Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection
Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection
Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection
Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection
Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection
Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection
Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection
Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection

Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection   Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection
406cc 10HPEngine 4 Stroke Single Cylinder. Through advanced software analysis and optimization design, the reliability of engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel. Compact structure, small size and light weight.

It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields. 4-stroke air- cooled engine Machine Piston: Vertical Single Cylinder Crankshaft: Horizontal.

Fuel oil tank volume(L):5.5 L. Shaft Type: Recoil manual start and optional electric start.

Shaft Length: 72.2mm (2-5/6 Length). Thread Size: 7/16-20UFN-2B, 20mm depth. Oil System: Pressure and Splash. Engine Cooling Type: Forced Air Cooling. Note: Read carefully before operation 1.

Refill engine oil in the shutdown state 2. Replace the filter every 500 hours 3. Change the oil every 100 hours (CD level or SAE 10W30 in winter/15W40 in summer) 4.

Clean the oil filter every 100 hours 5. Check the oil and fuel level before starting 6. Turn off the fuel switch after shutdown In order for the engine to work stably for a long time and prolong its service life, it must be run for more than 10 hours under half load Start steps: 1.

Turn on the fuel switch 2. Speed control handle to running state 3. Gently pull the starting handle until you feel resistance, and then put back the starting handle 4. Press the decompression handle 5. Pull the starter handle fully (the British stop pulling when the pulling wire is fully pulled out) If the engine does not start, repeat step 345.

This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Multi-Purpose Engines". The seller is "lynnshop2019" and is located in this country: US.

This item can be shipped to United States.
  • Brand: Unbranded
  • shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
  • Displacement capacity(cc)：: 406cc
  • Shaft Length:: 72.2mm (2-5/6\
  • Speed(rpm)：: 3600 rpm
  • Shaft Type: manual start

Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection   Air- cooled 406cc 10HP Engine 4 Stroke Single Cylinder Direct injection