52CC 2 Stroke Single Cylinder Demolition Concrete Jack Hammer Breaker Tool TOP

  
Specification Material: Steel, PP Surface Treatment: Painting Model: 125A Engine Type: 4434mm/17.3213.39inch Air-Cooled Single-Cylinder Two-Stroke Fuel: Mixed Oil Ratio: 25: 1(92#Gasoline: Motor Oil) Fuel Tank Capacity: 1.3L/54.95oz Displacement: 52cc Fuel Consumption Rate: =0.6L/h /25.36oz/h Impact Energy: 20-55J Impact Times: 1500bpm Max. Power And Speed:1.9kw/6500r/min Max.

Torque And Speed:3.5Nm/5000r/min Color: Black+Red Style: Modern Power Source: Gasoline Powered Starter System: Hand Pull Start Carburetor Type: H119-6A-00-210 Spark Plug Type: BM6A Number of Items: 1 Number of Chisels: 2 Assembly Required: Yes Mount Type: Floor Standing Product Size: 402795cm/15.7510.6237.4inch Chisel Type: Pin Card Type (Without Thread) 28400mm (1.115.75inch) P. Gas Gasoline Demolition Jack Hammer Concrete Breaker Punch Drill Jackhammer 52cc. Good tools are indispensable for the complicated work of breaking up concrete and block. Made of high-quality steel and PP, and adopting a painting process, this item lays a foundation for your long-term use. 1900W power, 52cc two-stroke engine, and 6500 r/min speed can greatly improve your efficiency.

With it, you can completely say goodbye to the traditional breaking method and work more easily. Bulid to Last: High-quality steel and PP, and painting process make this product solid, wear-resistant, impact-resistant, and rustproof, so it can keep beautiful and practical without frequent replacement. High Efficiency: The 52cc 2-stroke engine, 1900W power, 6500r/min speed, and 3.5Nm torque provide impact energy of up to 20-55J and impact times of 1500bpm, so it can efficiently help you do various heavy-duty works. Good Heat Dissipation : The air cooling model and multiple cooling holes on the body can timely reduce the temperature of the product in the process of operation, and avoid potential safety hazards, thus extending the product's service life.

Sturdy & Reliability: It features a commercial grade unit, toughened crankshaft, ball bearing construction, accurate thumb throttle control, and a high tensile gear set, so this item can realize maximum reliability. Large Capacity: 1.3L/54.95oz oil tank avoids frequent refueling and improves working efficiency. Elaborate Design: This product is mainly powered by gasoline without wire limitation, which provides more convenience for you to use outdoors.

Simple Installation and Use: The simple structure, detailed manual, ergonomic, anti-slip, and shock-absorbing double handles, starting device, and complete accessories ensure that you can complete the installation and start using it in a short time. Complete Kit: The combination of an oil feeder, two chisels, an installation kit, etc. Effortless Cleaning: The smooth surface allows you to easily remove dust and residues with a towel and water. Round Corners: Compared with traditional square corners, an arc design can better care for your skin.

Two Chisels: Two chisels of different shapes allow wider application, and it is also convenient for you to replace. Oil Filler: The filler with a large opening is convenient for you to add oil in time. This product is suitable for on-site work without a power supply or under wet conditions, such as foundation removal, lane removal, reinforced concrete floor or wall removal, penetrating hard rock, asphalt removal, trenching operation, driving grounding rod, farmland fence, and highway guardrail piling, etc.

It is also suitable for the compaction of loose material if suitable parts are connected. Engine Type: 4434mm/17.3213.39inch Air-Cooled Single-Cylinder Two-Stroke. Ratio: 25: 1(92#Gasoline: Motor Oil).

Fuel Tank Capacity: 1.3L/ 54.95oz. Fuel Consumption Rate: =0.6L/h /25.36oz/h. Power And Speed:1.9kw/6500r/min. Torque And Speed:3.5Nm/5000r/min. Starter System: Hand Pull Start. Product Size: 402795cm/15.7510.6237.4inch. Chisel Type: Pin Card Type (Without Thread) 28400mm (1.115.75inch).

Feedback is very important to us. It is impossible to address issues if we do not know about them!

Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.

If it's non-workdays, please kindly be patient and wait till Monday. Demolition Concrete Jack Hammer Breaker.

Mixed oil (25 gasoline: 1 motor oil). This item is in the category "Business & Industrial\Light Equipment & Tools\Breakers & Demolition Hammers". The seller is "alifastore" and is located in this country: US.

This item can be shipped to United States.

• Size: 40*27*95cm/15.75*10.62*37.4inch\
• Fuel Tank Capacity: 1.3L/54.95oz
• Max torque and speed:: 3.5Nm/5000r/min
• Max power and speed:: 1.9kw/6500r/min
• Shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
• Brand: Unbranded
• Type: Demolition Concrete Jack Hammer Breaker
• Material: Steel+PP
• Carburetor type:: H119-6A-00-210
• Displacement:: 52CC
• Power Source: 1700W
• Fuel: mixed oil (25 gasoline: 1 motor oil)
• Max impact: 20-55J
• Fuel Consumption Rate:: ≤ 0.6L/h
• Impact Frequency:: 700-1500BPM
• Starter system: Hand pull start
• Spark plug type:: BM6A
• Chisel Type: SDS-HEX 1-1/6\
• Warranty: 3 years
• Color: As picture shown