406cc 10HP Engine 4 Stroke Single Cylinder 1. Through advanced software analysis and optimization design, the reliability of engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel. Compact structure, small size and light weight. It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields.
4-stroke air- cooled engine Machine Piston: Vertical Single Cylinder Combustion system:Direct injection Borestroke(mm):86x70mm Displacement capacity(cc): 406cc Speed(rpm):3600 rpm Max. Output(kw): 6.8 Fuel:0#oil. Diesel Engine 4-stroke 406cc Single Cylinder Vertical Diesel Engine Air Cooled. 406cc 10HP Engine 4 Strok. 406cc 10hp 4 Stroke Engine Single Cylinder Vertical Air Cooling Motor. Through Advanced Software Analysis and Optimization Design, the Reliability of Engine in Structure and Cooling Is Ensured. Optimize Fuel System and Intake and Exhaust System to save Energy and Fuel. Compact Structure, Small Size and Light Weight. It Is Widely Used in Small Agricultural Machinery, Such As Micro-tiller, Pastoral Management Machine, Irrigation and Drainage Machine, Generator Set, Small Transport Vehicle, Small Walking Tractor and Other Fields. 4-Stroke Air- Cooled Engine Machine Piston: Vertical Single Cylinder. Fuel Oil Tank Volume(L):5.5 L. Shaft Type: Recoil Manual Start. Shaft Length: 72.2mm (2-5/6 Length). Thread Size: 7/16-20ufn-2b, 20mm Depth. Oil System: Pressure and Splash. Engine Cooling Type: Forced Air Cooling.406cc 10hp 4 Stroke Engine. Turn on the Fuel (Diesel) Switch 2.
Refill and Engine Oil in the Shutdown State. Replace the Filter Every 500 Hours. Refill and engine oil in the shutdown state. Replace the filter every 500 hours. Change the oil every 100 hours. (CD level or SAE 10W30 in winter/15W40 in summer). Clean the oil filter every 100 hours. Check the oil and fuel level before starting. Turn off the fuel (diesel) switch after shutdown. In order for the engine to work stably for a long time and prolong its service life, it must be run for more than 10 hours under half load. Turn on the fuel (diesel) switch. Speed control handle to running state. Gently pull the starting handle until you feel resistance, and then put back the starting handle.Pull the starter handle fully (the British stop pulling when the pulling wire is fully pulled out). If the engine does not start, repeat step 345.
Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Multi-Purpose Engines". The seller is "happyeachday" and is located in this country: US. This item can be shipped to United States.