406CC 4-Stroke 10HP Diesel Engine Single Cylinder Air Cooling Motor 1'' Shaft US

  

406cc 10HP Diesel Engine 4 Stroke Single Cylinder 1. Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel.

Compact structure, small size and light weight. It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields. Specifications: Model186F Singer-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion systemDirect injection Borestroke(mm)86x70mm Displacement capacity(cc) 406cc Speed(rpm)3600 rpm Max. Output(kw): 6.3 Fuel0#diesel oil.

406CC 4-Stroke 10HP Diesel Engine Single Cylinder Air Cooling Motor 1'' Shaft US. 406cc 10HP Diesel Engine 4 Stroke Single Cylinder. Singer-cylinder, vertical, 4-stroke air- cooled diesel engine.

Fuel oil tank volume(L)5.5 L. Shaft Type: Recoil manual start and optional electric start. Shaft Diameter: 1" Diameter, 1/4" Keyway. Shaft Length: 72.2mm (2-5/6 Length).

Thread Size: 7/16-20UFN-2B, 20mm depth. Oil System: Pressure and Splash. Engine Cooling Type: Forced Air Cooling. Note: Read carefully before operation 1.

Refill diesel and engine oil in the shutdown state 2. Replace the diesel filter every 500 hours 3. Change the oil every 100 hours (CD level or SAE 10W30 in winter/15W40 in summer) 4.

Clean the oil filter every 100 hours 5. Check the oil and fuel level before starting 6. Turn off the fuel (diesel) switch after shutdown In order for the engine to work stably for a long time and prolong its service life, it must be run for more than 10 hours under half load Start steps: 1.

Turn on the fuel (diesel) switch 2. Speed control handle to running state 3.

Gently pull the starting handle until you feel resistance, and then put back the starting handle 4. Press the decompression handle 5. Pull the starter handle fully (the British stop pulling when the pulling wire is fully pulled out) If the diesel engine does not start, repeat step 345.

Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal.

We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.

The item "406CC 4-Stroke 10HP Diesel Engine Single Cylinder Air Cooling Motor 1'' Shaft US" is in sale since Sunday, May 30, 2021. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Multi-Purpose Engines". The seller is "yixinstore1" and is located in Monroe Township, New Jersey.

This item can be shipped to United States.

• shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
• Brand: Unbranded
• MPN: Does Not Apply
• Speed(rpm): 3600 rpm
• Displacement capacity(cc): 406cc
• Shaft Length:: 72.2mm (2-5/6" Length)
• Engine Type: 4-Stroke
• Horsepower: 10 HP