2Hp 2-Stroke Single Cylinder Gasoline Engine Air-Cooled Water Pump Irrigation

  

2Hp 2-Stroke Single Cylinder Gasoline Engine Air-Cooled Water Pump Irrigation. The 2HP (43cc) two-stroke single-cylinder air-cooled. Engine can achieve a flow rate of 8m.

8.4ft, making your work easier and more efficient. We believe it will be your assistant in agricultural production, breeding or other work. The pump has a durable steel cam, crankshaft and cast iron cylinder body, which can withstand wear, is not easy to rust and corrosion.

The engine is a 2-stroke, single-cylinder, air-cooled. The maximum flow can reach 8m.

/h, pumping height can reach. Maximum lift is 98.4ft, which will undoubtedly help you in long-distance irrigation. The fuel tank with a capacity of 0.26 gallons makes the pump used for 1 hour under 3/4 load without sudden interruption.

The multiple uniform heat dissipation holes can timely reduce the temperature during operation, reduce potential hazards, and thus extend the service life of the product. This product can detect the. Level is low, the low.

Alarm sensor will give an alarm sound to ensure safe operation. Because of its small size. Weight, it can be easily carried. The high-quality carburetor and manual traction winding rope make the pump easy to start, saving energy and time. We aim to provide quality products and services.

We will reply and solve the problem for you as soon as possible. Lifting pump body can ensu. Re the stability of the product and protect it from being affected by moisture. The 1inch large diameter water inlet and outlet can be matched with different types of water pipes to facilitate installation. The sealing ring is used to avoid water leakage and reduce waste. Intel and Outlet Inside Diameter: 25.4mm/1inch. Fuel Tank Capacity: 1.0L/0.26gal. Pumping Height: 5-8m/16.4-26.3ft. Engine Type: Air-cooled, 2-stroke, Single Cylinder. Engine Power: 1.25kw/7000r/min(2hp). Starting Method: Manually Drawing Wound Rope. Ratio of Fuel and Lubricant: 30:1. Product Size: 273736cm/10.6214.5614.17inch.

Package Size: 36.53234cm/14.412.613.4inch. Other Pipe Fittings and Tools.

Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them!

Faction is our ultimate goal. We work hard to earn your trust and future business.

A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.

If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps".

The seller is "tadayshoping" and is located in this country: US. This item can be shipped to United States.

• Brand: Unbranded
• Intel and outlet inside DI.(mm): 25.4
• Engine model: 26m
• Suction height: 6m
• Max.
  capacity: 10m3/h
• Corresponding rationbed speed: 7000rmp
• Fuel tank capacity: 1.0L
• Engine type: air-cooled, 2-stroke,single cylinder gasoline
• Engine power: 1.25kw/7000r/min(2hp
• Engine displacement: 43.00cc(ml)
• Carburetor: Diahpragm type
• Starting method: manually drawing wound rope
• Ratio of fuel and lubricant: 30:1
• Net weight: 5.5kg
• Size of product: 36.5*32*34CM
• Shipment: Fast Shipping from US Warehouse
• Type: Water