2.12 Multi-Section Stroke Solid Single Acting 30T Hydraulic Cylinder Jack Ram

  

2.12 Multi-Section Stroke Solid Single Acting 30T Hydraulic Cylinder Jack Ram. [Model]: RMC-301L; [Capacity]:30T/66138LBS; [Total Stroke]: 54mm/2.12inch; [Outside Diameter]: 123x98mm(4.84x3.86inch); [Oil Storage]: 123cm³;[Stroke 1]:14mm, 309KN Capacity;[Stroke 2]:21mm, 137KN Capacity;[Stroke 3]:19mm, 50KN Capacity. After the pressure is relieved, the piston of the jack ram CANNOT retract by itself! You must use gravity to press the jack to retract, which is not a quality problem.

The hydraulic jack should be used with hydraulic pumps and suitable for single-action ones. This hydraulic cylinder jack has a smooth round, made of heavy-duty metal construction, the product surface is painted to prevent scratches and corrosion. Our Hydraulic Ram Cylinder Jack is used in power, chemical, steel, bridges, machinery and other industries. Suitable for vertical, horizontal and inverted directions, but cannot be tilted use. In order to operate correctly, all cylinders need to be connected to a solid flat lifting surface rather than soft or rough surface.

Home car type is not recommended. All we ask is you send it back in the same condition it was received - new and un-used. Logistical claims must be filed within 30 days of received the product; exchanges in these cases will be handled promptly and at? No cost to the customer.

However, any return that is NOT defective or NOT received in error, is the responsibility of the customer. Our friendly staff are available during these hours.