High-end Material: The diesel engine is made of aluminum alloy, which is durable and not easy to rust. Therefore, you can use it for a long time without frequent replacement, which can save your costs to a certain extent. The diesel engine adopts shot blasting, color galvanizing, and plastic spraying technology, which makes. 196cc Engine Motor Single Cylinder Air Cooled Fit Small Agricultural Machinery.
TYPE 1 :196cc Air-cooled Diesel Engine. Traditional diesel engines are noisy and inefficient.
The diesel engine is made of aluminum alloy, which is durable and not easy to rust. The diesel engine adopts shot blasting, color galvanizing, and plastic spraying technology, which makes the product surface smoother and the color brighter. The diesel engine has a power of 2200w and a rotating speed of 3000r/min, which provides you with strong power and ensures that your work can be completed quickly and easily. The diesel engine adopts a socket flow diesel system and single-valve fuel injection. It runs stably, emits less harmful gases, and causes less harm to the environment and the human body.
The diesel engine is equipped with a forced air cooling system and heat dissipation holes, with a good heat dissipation effect. It can reduce the temperature of the motor in time, prolong the service life of the motor and reduce potential safety hazards.The fuel tank capacity of the diesel engine is 3L/126.8oz, which can support you to work for a long time. Therefore, you do not need to refuel frequently, which is conducive to improving your work efficiency. Speed Regulating Handle: The handle is ergonomically designed and can be positioned at any speed. Air Filter: The air filter with a paper core inside is easy to maintain and disassemble, which can purify the air and make filtration more thorough. Camshaft: The camshaft is made of steel, which makes the engine work stably and can effectively control the opening and closing of the valve. Pressure Relief Cover: Made of aluminum, the pressure relief cover can help you start the engine more easily and make the product run more stably.
Base: The base of the product is very solid, which can make the machine more stable and not easy to shake during operation. This product is widely used in road-cutting machines, grinders, water pumps, micro cultivators, air conditioning compressors, micro-tiller, pastoral management machines, irrigation, and drainage machine, generator set, small transport vehicle, small walking tractors, etc. Turn on the fuel switch.
Turn the speed handle to the "ON" position and tighten it. Slowly pull the starting handle until it can not be pulled. Then, slowly take it back and let it go. Open the decompression handle and let go. Pull out all ropes with both hands.
If the diesel engine does not start, try again from step 3. Type:Type: Singer-Cylinder, 4-stroke Diesel Engine, Oblique horizontal Engine. Material: Aluminum Alloy, Steel, Aluminum. Surface Treatment: Shot Blasting, Color Galvanizing, and Plastic Spraying. Fuel Type: 0#(Summer), -10#(Winter) Diesel Oil.Lube Capacity: 0.7L/29.59oz. Rated Output Power: 2.2kw(3HP). Max Output Power: 2.42kw(3.3HP). Fuel Consumption Rate: =280g/ kw. Starter System: Recoil Hand Start. Net Weight: 21.6kg/ 47.62lbs. Gross Weight: 27kg/ 59.52lbs. Product Size: 36.139.530.5cm/14.2115.5512.01inch. Package Size: 42.538.541cm/16.7315.1616.14inch. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please use the specified diesel and guarantee the diesel is clean. Please use different lubricating oil for different seasons and keep the oil quantity within the specified range.
The air filter must be kept clean by cleaning or replacing the filter element regularly. Please don't run the engine when it exhausts black smoke.
When using the air filter, remove the air filter element every 50 hours (if there is much dust, remove it every 10 hours, clean it with clean detergent, blow it dry, and then put it into the air filter for use). Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.TYPE 2 :4-Stroke 196cc Single Cylinder Engine. Engine Single Cylinder 4-Stroke 196cc Shaft Length - 53mm Us Stock. Shell Material: Alloy Ignition Method: Pull Start Engine Displacement (Cc): 196cc Speed (Rpm): 3000r/Min Maximum Output Power: 2.2kw Start Mode: Recoil Type Hand Start Fuel Volume: 3l Oil Volume: 0.7l Piston Displacement: 0.196cc Stroke: 54mm (2.13 Inches) Bore Diameter: 68mm (2.68 Inches) Number of Cylinders: Single Cylinder Injection Pressure: 14±0.5 Hole Size: 0.8mm (0.0315 Inch) Fuel Consumption Rate: 0.5g/Kw. H Shaft Type: Flat Key Shaft Shaft Diameter: 20mm (0.787 Inches) Shaft Length: 53mm (2.09 Inches) Shaft Inner Diameter Thread Size: 0.8mm (0.0315 Inch) Oil System: Vortex Type Engine Cooling Method: Forced Air Cooling. Size: 403036cm (15.7511.81 Inches) Product Weight: 20kg (44.09 Pounds). Through Advanced Software Analysis and Optimized Design, the Reliability of the Engine in Terms of Structure and Cooling Is Ensured. Optimize the Fuel System and Intake and Exhaust Systems to save Energy and Fuel.
Self-injection Fuel System: Good Atomization, Low Fuel Consumption, More Punctual Fuel Injection, and Long Service Life. Small Size and Light Weight.
Compared with Gasoline Engines, It Is More Economical and Lighter than Engines. Tank Enhanced Thickening, Large Fuel Tank Volume, Special Painting Process, Seam Welding, and Oil Leakage.
Fast Heat Dissipation, Low Oil Temperature, Light Weight. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business.
A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.
Horizontal axis, air-cooled diesel engine. 395305361mm (15.5512.0114.21 inches). 6854mm (2.682.13 inches). Fuel consumption rate g / kw. 2.0cm (0.787 inch).2053mm (0.7872.09 inches). Shaft inner diameter thread size. M81.25mm (0.049 inch). This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Multi-Purpose Engines". The seller is "chengdukangten-5" and is located in this country: US. This item can be shipped to United States.