Stroke Single Cylinder

4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder

4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder
4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder
4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder
4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder
4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder
4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder
4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder
4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder
4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder
4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder

4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder    4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder

Product parametersDisplacement capacity(cc) 406cc; Speed(rpm)3600 rpm; Max. Output(kw): 6.3; Fuel0#diesel oil; Fuel oil tank volume(L)5.5 L; Starting systemRecoil; Shaft Type: Recoil manual start; Engine Cooling Type: Forced Air Cooling. Reliable and powerfulThrough advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured. Energy savingLarge capacity fuel tank, Enhanced thickening, large fuel tank volume, special painting process. Optimize fuel system and intake and exhaust system to save energy and fuel.

Compact structureCompared with gasoline engines, it is more economical and lighter than vertical diesel engines. Wide applicationIt is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields. Singer-cylinder, vertical, 4-stroke air- cooled diesel engine. Bore×stroke(mm)86×70mm/3.4×2.76inch.

Fuel oil tank volume(L)5.5 L. Shaft Type: Recoil manual start. Shaft Diameter: 1" Diameter, 1/4" Keyway.

Shaft Length: 72.2mm (2-5/6 Length). Thread Size: 7/16-20UFN-2B, 20mm depth. Oil System: Pressure and Splash. Engine Cooling Type: Forced Air Cooling. Refill diesel and engine oil in the shutdown state.

Replace the diesel filter every 500 hours. Change the oil every 100 hours. (CD level or SAE 10W30 in winter/15W40 in summer). Clean the oil filter every 100 hours.

Check the oil and fuel level before starting. Turn off the fuel (diesel) switch after shutdown. In order for the engine to work stably for a long time and prolong its service life, it must be run for more than 10 hours under half load. Turn on the fuel (diesel) switch. Speed control handle to running state.

Gently pull the starting handle until you feel resistance, and then put back the starting handle. Pull the starter handle fully (the British stop pulling when the pulling wire is fully pulled out).

The item "4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder" is in sale since Thursday, August 5, 2021. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Multi-Purpose Engines". The seller is "cekaay97" and is located in Elk Grove, California. This item can be shipped to United States.

  • Horsepower: 10 HP
  • Model: 186F
  • Engine Type: 4-Stroke
  • Tank Capacity: Fuel oil tank volume(L)5.5 L
  • Maximum Power: Max.

    output(kw): 6.3

  • Fuel Type: Diesel
  • Brand: LOYALHEARTDY


4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder    4 Stroke 10HP Diesel Motor Engine Heavy Duty 406CC Diesel Motor Single Cylinder